Product ID:POWER PAK,8011
MSDS Date:01/01/1985
FSC:4940
NIIN:00-803-6444
MSDS Number: BFQCN

CROWN INDUSTRIAL PRODUCTS COMPANY

STATE LINE ROAD
HEBRON, IL 60034
US

Emergency Phone: 815-648-2427

Cage: 92381

CROWN INDUSTRIAL PRODUCTS CO

350 HEBRON, IL 60034 US

Telephone: 815-648-2424

Cage: 92381

HALOGENATED HYDROCARBONS(MIXT. OF

Fraction By Weight: 100%

ACGIH TLV: 1000 PPM

DICHLORODIFLUOROMETHANE (SARA III)

CAS: 75-71-8

RTECS: PA8200000

Fraction By Weight: UNK

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ISOBUTANE AS MIXTURE, SEE FIRST INGREDIENT ENTRY

CAS: 75-28-5

RTECS: TZ4300000

Fraction By Weight: UNK

1,1,2-TRICHLORO-1,2,2-TRIFLUOROETHANE (FREON 113) (SARA

CAS: 76-13-1

RTECS: KJ4000000

Fraction By Weight: UNK

OSHA PEL 1000PPM/1250STEL

ACGIH TLV: 1000PPM/1250STEL9192

Effects of Overexposure:LT.HEADEDNESS,GIDDINESS,SHORTNESS OF
BREATH,HARCOSIS,CURDIAC ARRYTHMIAS.INHAL:REMOVE TO AIR,NO DRUGS

First Aid:EYES/SKIN:FLUSH IMMEDIATELY WITH WATER FOR 15 MIN. REMOVE
CONTAMINATED CLOTHING. INHALES: REMOVE TO FRESH AIR. GIVE CPR OR
OXYGEN IF NEEDED. KEEP WARM/QUIET.GET MEDICAL ATTENTION. EFFECTS
SHOULD DISAP PEAR AFTER 10 MIN.

Extinguishing Media:NONE
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:CONTAINERS MAY RUPTURE IN HEAT OF
FIRE.POISON GAS MAY ESCAPE DURING FIRE.

Spill Release Procedures:DO NOT TOUCH SPL MTL. SM SPL: ABSORB. W SAND,
OTHER NONCOMB ABSORB; FLUSH W H'2O.LG SPL: DIKE FAR AHEAD OF SPL
FOR LATER DISP. STOP LK. NO IGN SOURC. ISOLATE AREA UNTIL GAS
DISPERSED.USE H'2O SPRY T O REDUCE VAPORS. KEEP UPWIND. PROVIDE
VENT.

Handling and Storage Precautions:DO NOT SPRAY INTO OR AROUND OPEN
FLAMES AND SPARK.EXPOSURE TO HEAT OR SUNLIGHT OR WHERE TEMPERATURE
EXCEEDS 120F MAY CAUSE BURSTING.AVOID SKIN CONTACT
Other Precautions:USE ONLY AS DIRECTED,INTENTIONAL MISUSE BY
DELIBERATELY CONCENTRATING VAPORS & INHALING CONTONTS CAN BE
HARMFUL OR FATAL.

Respiratory Protection:IF EXCED TLV,NIOSH/MSHA APPR SELF-CNTND BRTHG
APP (POS PR MODE)
Ventilation:LOCAL EXHAUST TO ELIMINATE MISTS/FUMES/GASES.
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES
Other Protective Equipment:WEAR FULL PROTECTIVE CLOTHING.
Supplemental Safety and Health
INGREDIENTS OF ITEM SPECIFIED BY MFR VIA PHONECON ON 13 JULY 1983.

HCC:V2
Boiling Pt:<-6.7C, 20.F
Vapor Pres:>85
Vapor Density:4.4
Spec Gravity:1.485
Solubility in Water:SLIGHT
Appearance and Odor:COLORLESS LIQUID,SLIGHT ETHERAL ODOR.
Percent Volatiles by Volume:100.

Stability Indicator/Materials to Avoid:YES
AVOID STRONG ALKALI (E.G. NAOH, NH:4OH,ETC.)
Stability Condition to Avoid:HIGH TEMPERATURES,IGNITION SOURCES
Hazardous Decomposition Products:HYDROCHLORIC AND HYDROFLYORIC
ACIDS-POSSIBLE PHOSGONE.

Waste Disposal Methods:AEROSOL CONTAINER-DO NOT PUNCTURE OR INCINERATE
CAN.WHEN ALL LIQUID IS EXCELLED,CONTINUE TO DEPRESS BUTTON UNTIL
ALL GAS IS EXPELLED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.